ZJHP Pneumatic Diaphragm With Hand Wheel Single-seat Regulating Valve
Product overview
Product model: ZJHP
Nominal diameter: DN20mm~200mm
Nominal pressure: 1.0, 1.6, 4.0, 6.4MPa
Applicable temperature: -200℃ ~ +560℃
Main material: HT200, ZG230-450 ZG1Cr18Ni9Ti
Flange standard: cast iron flange according to GB4216.5-84 cast steel flange according to GB9113-88, JB/T79-94
ZJHP Pneumatic Diaphragm With Hand Wheel Single-seat Regulating Valve Product description:
The ZJHP Pneumatic Diaphragm With Hand Wheel Single-seat Regulating Valve produced and sold by Baigang Valve Group adopts top guide structure and multi-spring actuators.It has the advantages of compact structure, light weight, sensitive action, S-streamline fluid channel, small pressure drop loss, large valve capacity, accurate flow characteristics, convenient disassembly and assembly, etc.Widely used to accurately control gas, liquid and other media, process parameters such as pressure, flow, temperature, liquid level to maintain a given value.Especially suitable for small leakage valve before and after the pressure difference is not big working occasions.
This series of products have a standard type, regulation cut off, bellows sealed, jacket insulation and other varieties. Nominal product pressure rating PN10,16,40,64; body diameter range DN20 ~ 200. For fluid temperature from -200 ℃ ~ + 560 ℃ range of a variety of grades. Leakage standards have grade IV or VI level. Flow characteristics are linear or equal percentage. A wide variety of specifications to choose from.
ZJHP Pneumatic Diaphragm With Hand Wheel Single-seat Regulating Valve Features:
1, top-oriented single-seat control valve, compact structure, fewer parts, easy maintenance.
2, the metal spool for a variety of workplaces, up to Level IV leakage
standards, ZXPQ-type soft-sealed spool up to Level VI leakage
standards.
3, the valve body designed by the principle of fluid mechanics, such
as cross-section low flow resistance flow channel, the rated flow
coefficient increased by 30%.
4, adjustable range, the inherent adjustable ratio of 50.
5, the implementing agencies using multi-spring structure, a 30% reduction in height, weight reduction of 30%.
6, ZXPV bellows sealed control valve, the valve stem to form a complete seal, blocking fluid leakage.
7, ZXPJ-type control valve with a thermal jacket for fluid cooling
easy to crystallize, clogging caused by solidification of the occasion.
ZJHP Pneumatic Diaphragm With Hand Wheel Single-seat Regulating Valve Part Information:
Body, bonnet: HT200, ZG230-450 ZG1Cr18Ni9Ti
Spool, seat: 1Cr18Ni9Ti, Stellite alloy surfacing
soft seal Spool: Reinforced PTFE
Filling: PTFE, flexible graphite
bellows: 1Cr18Ni9Ti
pad Film: Asbestos board, 10,1 Cr18Ni9Ti, asbestos wrap gasket
Membrane cover: A3
Corrugated diaphragm: NBR rubber reinforced polyester fabric
Spring: 60Si2Mn
Stem, push rod : 2Cr13 , 1Cr18Ni9Ti
Bushing: 2Cr13
ZJHP Pneumatic Diaphragm With Hand Wheel Single-seat Regulating Valve technical Parameters:
|
Nominal diameter DN (mm) (Spool diameter dN) |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
|||||
|
(10) |
(12) |
(15) |
(20) |
|||||||||||||
|
Rated flow coefficient Kv |
straight line |
1.8 |
2.8 |
4.4 |
6.9 |
11 |
17.6 |
27.5 |
44 |
69 |
110 |
176 |
275 |
440 |
690 |
|
|
Equal percentage |
1.6 |
2.5 |
4.0 |
6.3 |
10 |
16 |
25 |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
||
|
Rated stroke L (mm) |
16 |
25 |
40 |
60 |
||||||||||||
|
Diaphragm effective area Ae (cm 2) |
280 |
400 |
600 |
1000 |
||||||||||||
|
Signal range Pr (kPa) |
20 to 100, 40 to 200 |
|||||||||||||||
|
Air pressure Ps (MPa) |
0.14 ~ 0.4 |
|||||||||||||||
|
Inherent flow characteristics |
Straight line, equal percentage |
|||||||||||||||
|
Inherent adjustable ratio |
50 |
|||||||||||||||
|
Allow leakage |
Hard Seat: Class IV (10 -4 valve nominal capacity) Soft Seat: Class VI |
|||||||||||||||
|
Nominal pressure PN (MPa) |
1.0, 1.6, 4.0, 6.4 |
|||||||||||||||
|
Operating temperature t (° C) |
Normal temperature type |
-20 to 200, -40 to 250, -60 to 250 |
||||||||||||||
|
Cooling type |
-40 ~ 450, -60 ~ 450 |
|||||||||||||||
|
High temperature type |
450 ~ 560 |
|||||||||||||||
|
Low temperature type |
-60 ~ -100, -100 ~ -200, -200 ~ -250 |
|||||||||||||||
* This product performance indicators to implement GB / T4213-92 standards
◆ Dimensions and Weight Standard, heat sink, high temperature type Dimensions Unit: mm
|
Nominal diameter |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
||
|
φ A |
282 |
308 |
394 |
498 |
|||||||||
|
L |
PN16, 40 |
150 |
160 |
180 |
200 |
230 |
290 |
310 |
350 |
400 |
480 |
600 |
|
|
PN64 |
230 |
230 |
260 |
260 |
300 |
340 |
380 |
430 |
500 |
550 |
650 |
||
|
H 1 |
PN16 |
53 |
58 |
70 |
75 |
83 |
93 |
100 |
110 |
125 |
143 |
170 |
|
|
PN40 |
53 |
58 |
70 |
75 |
83 |
93 |
100 |
118 |
135 |
150 |
188 |
||
|
PN64 |
65 |
70 |
78 |
85 |
90 |
103 |
108 |
125 |
148 |
173 |
208 |
||
|
H |
standard type |
PN16 |
429 |
438 |
474 |
476 |
502 |
622 |
646 |
687 |
835 |
889 |
981 |
|
PN40 |
429 |
438 |
474 |
476 |
502 |
622 |
646 |
695 |
845 |
896 |
1000 |
||
|
PN64 |
456 |
468 |
511 |
525 |
535 |
663 |
673 |
705 |
868 |
958 |
1260 |
||
|
Cooling high temperature type |
570 |
570 |
610 |
610 |
630 |
730 |
810 |
820 |
960 |
1090 |
1180 |
||
* Cooling, high temperature type (H) is the value of PN16 ** Jacket height H1 and H increased by 15%
◆ Bellows sealed external dimensions
|
Nominal diameter |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
|
φ A |
282 |
308 |
394 |
498 |
|||||||
|
L |
150 |
160 |
180 |
200 |
230 |
290 |
310 |
350 |
400 |
480 |
600 |
|
H 1 |
53 |
58 |
70 |
75 |
83 |
93 |
100 |
110 |
125 |
143 |
170 |
|
H standard |
446.5 |
453.5 |
490 |
542 |
537.5 |
617.5 |
667 |
675 |
735 |
907.5 |
900 |
Specifications Weight:
Regulating valve weight table unit: kg
|
Nominal diameter |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
|
|
Standard type |
PN16 |
16 |
17 |
19 |
21 |
23 |
35 |
48 |
57 |
64 |
70 |
90 |
|
PN40 |
16 |
17 |
19 |
21 |
23 |
35 |
48 |
60 |
67 |
74 |
95 |
|
|
PN64 |
20 |
21 |
25 |
30 |
33 |
44 |
71 |
91 |
100 |
115 |
145 |
|
|
Cooling high temperature type |
17 |
18 |
20 |
22 |
25 |
36 |
51 |
60 |
67 |
74 |
95 |
|
|
Bellows type |
20 |
21 |
25 |
30 |
33 |
48 |
71 |
91 |
102 |
115 |
145 |
|
|
Low temperature type |
20 |
21 |
23 |
26 |
28 |
42 |
58 |
69 |
77 |
84 |
108 |
|
* In this table, the weight of high temperature type of heat dissipation is based on PN16 and the low temperature type is based on PN40
Connection standard:
· Flange standard cast iron flange according to GB4216.5-84 steel flange according to GB9113-88, JB / T79-94
· Flange sealing surface type: PN10, PN16 is convex; PN40, PN64 is convex surface, body is Concave.
· Membrane actuator air signal interface: Female thread M16X1.5
· Jacket insulation jacket Heat transfer body interface: Butt welding φ18X4
* The body flange and the flange end face distance can be manufactured according to user-specified standards.
Such as: ANSI, JIS, JPI and other standards.
◆ Ordering Information When
ordering, please provide the following information:
· Control valve name and model
· Nominal diameter (mm)
· Nominal pressure (MPa)
· Rated flow coefficient (Kv)
· Inherent flow characteristics
· Media name
· Operating temperature and range
· The whole mode
of action · Body, valve trim and packing material
· With accessories
· Other special requirements
Reminder:
All text, data and pictures in this article are for reference only.To see more details of the ZJHP Pneumatic Diaphragm With Hand Wheel Single-seat Regulating Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.
Headquarters Tel: +86-021-57278880
Sales Tel: +86-021-57278881
Fax: +86-021-57278882
E-mail: baigangvalve@163.com
Site: m.sxxlqz.cn
Add: Tinglin Industrial Park, Jinshan District, Shanghai
Sweep Mobile Access
